Shop Bikes & Gear

Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Need a healthy hydration boost? Enjoy Nuun Vitamins! For everyday health and hydration essentials, Nuun Vitamins provides a boost in the 11 different vitamins most under-consumed in the average diet. Nuun Vitamins is a tasty and healthful way to top-up on the minerals that your body needs for everyday energy and vitality. - 12 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

The Carve models manage without hard shells and are, therefore, light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept, provide high impact absorption and protection. With the Carve Evo+, we introduce product properties like exchangeable padding and the newest generation of structurally improved AeroMesh, offering a higher level of comfort and structural strength. - Xmatter protection foam (exchangeable) - AeroMesh, light, moisture wicking, breathable, anti-bacterial, added structural strength, high level of comfort - LoopLock closings - Silicone gripper - Certifications: EN1621-1:2012, EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.) - Material composition: 40% Polyester, 25% PU, 15% Nylon, 15% Kevlar, 5% EVA

- Service parts for E-13 chainguides

absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 9, 10, 11, and 12-speed Eagle compatible

absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 9, 10, 11, and 12-speed Eagle compatible

absoluteBLACK 96 BCD chainrings for Hyperglide+ greatly improve traction and climbing abilities. They are designed specifically for Shimano XT M8000, SLX M7000, and MT700 1x or 2x cranks. These chainrings will only work with Shimano CN-M9100, 8100 & 7100 Hyperglide+ chains due to the different thickness and shape of the teeth. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4% and timing of 110.5-116.3° after TDC (top dead center). - This chainring will only work with Shimano CN-M9100, 8100, & 7100 Hyperglide+ chains due to the different thickness of the teeth - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Provides excellent weight-to-strength ratio - Chainrings have built-in standoffs to provide the ideal 1X chainline - For 49mm chainline - Only use the included extra-long chainring bolts

absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)

absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 6mm offset for standard 49mm chainline

This absoluteBLACK 1x Oval Direct Mount Chainring for CINCH is designed exclusively for use with Shimano Hyperglide+ chains (CN-M9100, 8100, and 7100). Oval chainrings greatly improve traction and climbing abilities. They are crafted from CNC machined 7075 aluminum for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%. - This chainring will only work with Shimano Hyperglide+ CN-M9100, 8100, & 7100 chains due to the different thickness of the teeth - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed) - Provides excellent weight-to-strength ratio

absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks - Designed for GXP, DUB, and long-spindle BB30 cranks

absoluteBLACK Oval Direct Mount 1x Chainrings for Shimano greatly improve traction and climbing abilities. They are designed for Shimano XTR M9100, XT M8100, and SLX M7100 cranks and will only work with 12-speed Hyperglide+ chains. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - This chainring will only work with Shimano CN-M9100, 8100, & 7100 Hyperglide+ chains due to the different thickness of the teeth - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio

Master of the gnarniverse. Bold claim. The SB165 was created to get after whatever you're getting after. The slackest sled in our lineup, with kinematics tuned for a coil-shock, the SB165 is at home outside the tape and trusted on the lines where mistakes can't happen. The SB165 already has you covered. - We wanted the SB165 to rip and have a poppy, maneuverable feel on the trail, so we built it around the 27.5" wheel platform. - At the heart of the SB165 suspension design is our patented Switch Infinity suspension system. Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Tuned to rip on the gnarliest trails, built tough to handle tosses and nasty tech, with kinematics specific for a coil or high-volume air shock. - The SB165 is designed to handle the steeps, so we made it low, long, and slack. - Better decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - Chain Guide-ready out of the box with ISCG 05 mounts. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series models feature small changes to the carbon fiber layup, enabling us to make a more aggressively priced carbon frame. Build Highlights - C/Series carbon fiber frame - FOX Performance 38 fork - FOX Performance DHX2 rear shock - SRAM GX Eagle drivetrain - SRAM Code R brakes - DT Swiss Custom E1900 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.

This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty

Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to six mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 6 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 73.00 lbs - Dimensions: L 22.00in x W 69.50in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required

Xpedo cleat set for Xpedo M-Force pedals - Weight: 65g per set with hardware

We did our homework on this cog and we think you will be pleased with the result! This 16t cog smooths out the cog to cog transition when using our GC and a standard 10 speed 11-36 cassette. You should expect this to shift well and last as long as the rest of your cassette cogs of similar size. Here are the transitions WITHOUT the 16t cog (4 tooth max jump): - Remove the 15t -> 11-13-17-19.... - Remove the 17t -> 11-13-15-19... Here are the transitions WITH the 16t cog (3 tooth max jump): - Remove 15t & 17t-> 11-13-16-19... Compatibility: Shimano 10 speed cassettes - XT 11-36t (CS-M771) - XTR 11-36t (CS-M980) - Other 11-36t Shimano cassettes like SLX HG81 11-36t - Modification required (must drill out rivets holding the 17t to the larger cogs) SRAM 10 speed cassettes - PG 1030, 1050, and 1070 - 11-36 and 12-36 - X0 11-36t(XG - 1080) - Remove the 14t rather than the 17t

GCX cogs replace the largest cog on SRAM 11-speed XD cassettes for extra durability and to lengthen the cassettes life. - GCX cogs replace the largest cog on SRAM 11-speed XD cassettes for extra durability and to lengthen the cassettes life; also offered in a 44T for expanded climbing range - Not compatible with any other cassettes

- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy

The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

Wolf Tooth Remote Pivot Axle

Wolf Tooth designed these bolts to be the best on the market. They have a 4mm hex socket and are 10mm long so you can use a bash ring with your chainring that has threaded standoffs like the Wolf Tooth 104 BCD 30t ring, Elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings.

- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"

Whisky Parts Co. Tubeless Rim Tape.

You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 chainring bolt