Accessories

Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air

Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.

The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

Install or replace all lock cylinders on your Thule products and use the same key for all. - Set of 2 locks, all using the same key - Including grip-friendly Thule Comfort key - Replace the locks in your Thule product in a few easy steps

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key

Upright bike carrier for the quickest, most convenient mounting – for bikes up to 44 lbs. - 2 One Key lock cylinders (sold separately) lock the bike to carrier and carrier to rack. - Mounts to all Thule rack systems, round bars and most factory racks - Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray - Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting - Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage - Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw - Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps - Easy, tool-free interface for switching carrier from one side of your car to the other.

- The original third-Eye bar-End mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to most handlebar bar-End with a rubber, Internal-Expanding plug system

Bigger and Stronger for a Better Ride Featuring an improved ride feel and more accurate power measurements, this smart bike trainer has everything you need for an enjoyable and efficient indoor training session. - Ride hard. This trainer can handle sprints up to 2,000 watts. - Work up a sweat with inclines up to 16% that hold up to your most serious sprints. - Accuracy matters. Measure your power to within 2.5%. - Keep crushing it with your favorite apps, including Zwift and Tacx. - Finally, a trainer that won’t wake the whole house when you ride hard. ACCURATE AND RELIABLE This trainer is redesigned to let you track your performance and progress with reliable, consistent measurements. That includes power, speed and cadence, measured accurately within 2.5%. READY TO SPRINT The well-balanced design and large footprint of the FLUX 2 Smart trainer ensures maximum stability, even during the most explosive sprints, up to 2,000 watts. CLIMB HIGHER Get the most out of your intense workouts by training on realistically simulated inclines up to a 16% gradient. A MORE REALISTIC RIDE At 16.8 lbs (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness. SMOOTH AND SILENT This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available. IMPROVED COMPATIBILITY The trainer comes with additional axle adapters to significantly improve the axle compatibility. It is compatible with 142x12 mm and 148x12 mm axles — right out of the box. HIGHLY COMPATIBLE The FLUX 2 Smart trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift. ABLE TO STAND ALONE You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance. DEVICE COMPATIBILITY Connect FLUX 2 Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time. TACX TRAINING SOFTWARE Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan. TACX TRAINING PLANS Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more.

For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad. - Wheel-on design sets up with two easy clicks and securely locks in place - Measures speed, power, and cadence - Virtually silent flywheel lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 7% gradient FEATURES Type of trainer: Interactive Smart trainer with electric brake Magnets: 6 Magnets Transmission: Roller, 30mm Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 800 Watt Max. incline: 6% Simulation of descent: No Max. torque: 15.3 Nm Max. brake force: 45 N Flywheel: 1.6 kg Mass inertia: 11.8kg (26.0 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 9.41 kg (20.7 lbs) Article number: T2240 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence , Power , Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <5%

The iconic, progressive, and popular NEO 2 Smart is optimized with an even quieter and more powerful Smart direct drive. The motor is redesigned in order to provide a better indoor cycling experience and ride feel, especially during climbs and sprints. The NEO 2T Smart is more silent than ever thought possible and is, without question, the most powerful, realistic, and accurate bike trainer to date. - Improved air and mechanical stillness results in a nearly silent smart bike trainer with power and cadence accuracy within 1% - New motor design creates enhanced ride feel during climbs and acceleration and when riding at low speed or cadence - Now enables accurate pedal stroke analysis via compatible third-party software and Edge bike computers - Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride - Road feel feature lets you experience the sensation of different road surfaces, such as cobblestone and gravel FEATURES - Type of trainer: Interactive Smart direct-drive with motor brake - Magnets: 32 Neodymium magnets - Transmission: None - Electrical requirements: 110-240 Volt, Main power optional - Power indicator: Multicolor LED, Spot on floor - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 – 12 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately - Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available - Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2200 Watt - Max. incline: 25% - Simulation of descent: Yes - Max. torque: 85 Nm - Max. brake force: 250 N - Flywheel: Virtual - Mass inertia: Variable to 125kg (275.6lbs) - Calibration: No calibration required - Footprint (lxw): 575 × 750mm (22.6 × 29.5 in) - Height: 550mm (21.7 in) - Dimensions when folded: 620 × 260 × 440mm (24.4 × 10.2 × 17.3 in) - Weight: 21.5 kg (47.3 lbs) - Article number: T2875 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet - Output: Cadence, Power, Speed - Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet - Error Tolerance: <1%

Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!

Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.

Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill

Sharp cuts for fine-tuning, developed specifically for MTB tires. The tongs, with their exact tread-height adjustment function, allow precise shortening of the tire lugs.

The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

With its robust construction, eye-catching style and compact design that carries both bikes on a single bar, the SuperClamp is your bike’s new BFF. This lightweight – yet mighty – platform hitch rack is ready to hit the road at a moment’s notice. Whether you’re hauling eBikes, beefy mountain bikes, your prized TT rig, or an assortment of bicycles, the SuperClamp’s dual shepherd’s hooks promise all bikes a truly secure ride without touching the bike’s frame. And thanks to the SuperClamp’s tilting feature, no more unloading bikes to let the dog out of the back. Simply tilt down and release the hounds. Top it all off with integrated locks, a built-in bottle opener and head-turning reflectors, the SuperClamp 2-bike is proof that you can have your cake and eat it too. - Fastest loading bike rack around thanks to the dual wheel-clamping hooks (bonus: no frame contact). - Lightweight, yet mighty! Weighs only 35 lb, and is rugged enough to carry 2 bikes, up to 60 lb each. - Features integrated locks and reflectors for extra security and visibility, day and night. - Open Sesame! Tilting feature allows hatch access, even when fully loaded, and folds up when not in use. - Sleek and compact design holds 2 bikes on a single bar.

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes

- Improved sealing and durability - New rotating metal hose fittings - High-volume hose with clamp - Longer lasting - Must-have for all mechanics - DOT 5.1 - NOT compatible with RockShox fork bleed kit

Using the same technology of the SlideCage but for front bottle insertion and featuring a bottle size adjustment nose the Topcage delivers great performance and fits to all plastic drinking bottles.

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.